Lynnwood's Most Trusted Chimney Sweep — Safe Fires Start Here

The National Fire Protection Association recommends annual chimney cleaning and inspection for any fireplace or wood-burning appliance that sees regular use. In Lynnwood's climate, where moisture accelerates creosote development, annual service is especially important. If you burn frequently — more than three times a week during winter — consider a mid-season check as well.

A standard chimney sweep and Level I inspection in the Lynnwood area typically ranges from $150 to $250 depending on flue size, accessibility, and creosote buildup level. Repairs, liner installations, and Level II video inspections are priced separately. David Chimney provides free estimates so you know the full cost before any work begins.

No — not when it's done correctly. David Chimney uses professional-grade HEPA-filtered vacuum systems that capture soot and debris at the source before it can enter your living space. We also lay drop cloths and seal the firebox opening during cleaning. Your home will be left in the same condition we found it, guaranteed.

Creosote is a flammable byproduct of wood combustion that coats the inside of your flue. It accumulates in three stages — from flaky deposits to a hard, tar-like glaze — and is the primary cause of chimney fires. Even a thin layer of Stage 3 creosote can ignite at temperatures chimney flues regularly reach. Annual cleaning removes it before it becomes a fire hazard.

Yes — a Level II chimney inspection is strongly recommended and often required by mortgage lenders when buying a home. It includes video scanning of the flue liner and identifies damage that standard home inspectors routinely miss. David Chimney provides written reports with photos, giving buyers clear documentation for negotiations or repair planning before closing.

Yes. Cracked flue liners can be repaired or replaced depending on severity. Options include stainless steel liner relining — the most common solution — or cast-in-place liner systems for irregular flues. Leaving a cracked liner unaddressed allows carbon monoxide and heat to reach combustible framing, which is a serious safety hazard. We assess, recommend, and install the right fix.

A standard chimney sweep with Level I inspection typically takes 45 to 90 minutes for a single-flue system. Homes with multiple flues, significant creosote buildup, or additional services such as cap installation or damper replacement may take two to three hours. We'll give you an accurate time estimate when you book so you can plan your day accordingly.

Yes. Gas fireplaces and inserts still require annual inspection and cleaning. Burner ports clog with debris, venting components corrode, and pilot assemblies deteriorate over time. A clogged gas flue can cause dangerous carbon monoxide buildup. David Chimney inspects gas appliance venting, checks for proper draft, and cleans accessible components to keep your gas fireplace operating safely and efficiently.